MK S2/4-1500 , MK S4-1500 Automatic Test System

Current

5mA to 1000mA Programmable 1mA

Voltage

1V to 30V Programmable to 1V

High Voltage DC

Voltage

25V to 1500V Programmable 5V

Current

0.1uA to 4000uA

High Voltage AC (when fitted)

Voltage

25V to 1000V RMS @ 50 Hz Programmable to 5V

Current

1uA to 5000uA

Typical Test Performance

Continuity

Switching speed > 50000 points per second
0.05s per established connection
0.05s shorts test per point

Insulation and Hi-pot

Programmable Ramp, Pre Dwell and Dwell times.
Minimum 0.1s per point

Measurements

Continuity

0.002Ω to 100KΩ (4-wire mode)
0.1Ω to 100KΩ(2 wire mode)
Accuracy 0.5% +/- 0.002Ω@ 1000mA (4-wire mode)
Accuracy 0.5% +/- 0.1Ω @ 1000mA (2-wire mode)
Resolution 0.001Ω (4-wire mode)
Resolution 0.1Ω (2-wire mode)

DC Insulation

5KΩ to 1000MΩ Accuracy 5%

AC Hi-pot

1uA to 5000uA Accuracy 5%

Interface

32 off 4 wire (Kelvin) Test points per board
64 off 2 wire Test points per board
Maximum 512 test points per sub-rack, maximum 512 sub-racks, 262144 points
Connection via high specification 37 way "D" type sockets
Connection on pins 1 to 32,33 to 37 not used, interlock on front panel

Options

Extended continuity range up to 1MΩ
Increased continuity test current up to 10A
Custom voltages up to 100KV
External Instruments and customised electrical tests
Communication with other devices
Customised import facility for programme creation